Thank you for following Zhonghe Intelligence
PRODUCT THROUGH TRAIN
Full-automatic cutting and stacking machine
This equipment is mainly used for the automatic rewinding of positive and negative coils formed by the pole ear, automatic deviation correction, tension control, CCD defect detection, drive, cutting and forming rounded corners, iron removal and dust removal, CCD size detection, NG removal, vacuum belt delivery, CCD predetermined position, diaphragm rewinding, stacking table into a cell according to the set number of layers, glue after diaphragm cutting, feeding, material and other functions; finally the cell is loaded in the tray, which can be connected to the automatic logistics line and MES system, etc.
key word:
Category:
Full-automatic cutting and stacking machine
Hotline:
Full-automatic cutting and stacking machine
This equipment is mainly used for automatic rewinding of positive/negative coils, automatic deviation correction, tension control, CCD defect detection, driving, cutting molding round corners, iron dust removal, CCD size detection, NG removal, vacuum belt transportation, CCD prepositioning, diaphragm reeling, lamination table into cells according to the set number of layers, glueing, diaphragm cutting and other functions; finally the cells are loaded in the tray, which can be docked with the automatic logistics line and MES system, etc.
| Project | Specifications |
| Impulse method | Hardware mold punching and cutting |
| Material system | Continuous coated pole coil of molded pole ears |
| Coil diameter | ≤Φ700mm |
| Reel inner diameter | 3＂/6＂ |
| Pole winding error(mm) | ±2 |
| Polar snake-shaped bending error(mm/m) | ＜2 |
| Polar wave edge height difference(mm) | ＜2 |
| Pole width error(mm) | ＜0.5 |
| Thickness T | 5～20mm |
| Width W | 80～200mm |
| Length L | 120～300mm |
| Polar ear length L1 | 10～30mm |
| Polar ear direction | Same side/different side |
| Project | Specifications | |
| Positioning method | CCD positioning | |
| Stacking efficiency | Single workstation 0.6 (whole machine 0.2) s/pcs | |
| Auxiliary time | ＜10s | |
| The size of the burr |
Va≤12μm；Vb≤10μm |
 |
| Mold life |
1. Number of times available after each mold modification≥150Ten thousand times； 2. Number of mold repairable≥10Come next in order； |
|
| The alignment accuracy between the pole and the diaphragm | Center deviation≤±0.3mm | |
| Diaphragm end facing accuracy | ≤±0.4mm | |
| Adjacent polar alignment accuracy | ≤±0.3mm | |
| Overall alignment accuracy of the pole | ≤±0.5mm | |
| Number of stacks | It can be set within the thickness adaptation range | |
| Outsourcing diaphragm | Untailed volume | |
| Die-cutting pass rate | ≥99.5%(Bad Caused Only by This Machine) | |
| Laminated pass rate | ≥99.5%(Bad Caused Only by This Machine) | |
| Whole machine pass rate | ≥99%(Bad Caused Only by This Machine) | |
| Crop dynamics | ≥98%（Bad Caused Only by This Machine） | |
| Dimensions of appearance | W13000mm x L5000mm x H2700mm | |
| Weight/bearing | About35000Kg；＞800Kg/M² | |
| Power supply | AC380V Three-phase electricity；Voltage fluctuation±10%；Power:120KW；Frequency:50Hz | |
| Compressed air | 0.5～0.7Mpa（5～7kgf/cm²），Dosage:3000L/min | |
RELATED PRODUCTS
Consult immediately
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
An intelligent modern intelligent manufacturing enterprise integrating research and development, production, sales and service
CONTACT
Address: Building 1, No. 161, Dalingshan shuichang Road, Dalingshan Town, Dongguan
Tel：+86-769-83356696-808
Fax：+86-769-83356696
Sales Hotline：+86-18025940599（Mr.Chen)
E-Mail：ChenJiedong@gd-zhonghe.com
Follow us
COPYRIGHT 2023Guangdong Zhonghe Intelligent Equipment Co., Ltd Disclaimers
