Thank you for following Zhonghe Intelligence
PRODUCT THROUGH TRAIN
High-speed double-station laminating machine
● The linear motor drives the manipulator to take and load the sheets, and the linear motor drives the stacking table to move the sheets, so as to realize high-speed and high-precision stacking, and at the same time reduce the noise of machine operation. ● The CCD system takes pictures to position the pole pieces, and the servo three-axis alignment platform corrects the position of the pole pieces. The CCD positioning accuracy is ≤ ±0.1mm. At the same time, it can detect the missing angle and size of pole pieces and pole tabs, and automatically eliminate the defective pole pieces.
key word:
Category:
Full-automatic lamination machine
Hotline:
High-speed double-station laminating machine
● The linear motor drives the manipulator to take and load the sheets, and the linear motor drives the stacking table to move the sheets, so as to realize high-speed and high-precision stacking, and at the same time reduce the noise of machine operation.
● The CCD system takes pictures to position the pole pieces, and the servo three-axis alignment platform corrects the position of the pole pieces. The CCD positioning accuracy is ≤ ±0.1mm. At the same time, it can detect the missing angle and size of pole pieces and pole tabs, and automatically eliminate the defective pole pieces.
● Active tension control system: the servo motor continuously uncoils to avoid the influence of following error and rolling inertia on the tension of the diaphragm caused by frequent start and stop of the diaphragm; The servo motor drives the pendulum roller to tension the diaphragm, and the tension of the diaphragm is accurately controlled by the servo torque mode; The retraction and release length of the diaphragm is changed caused by the translation and transposition of the stack, and the active buffer high-speed response compensates the retraction and release of the diaphragm, so that the diaphragm is stable without jumping, and the diaphragm tension is stable.
● Dust control: intermediate isolation treatment of positive and negative electrodes. Multiple dust suction ports are arranged at workstations such as material box, positioning and stacking table, which are connected to fans for dust suction. FFU air supply at the top of the outer cover enables slight positive pressure inside the equipment to realize air circulation and filtration.
● Product parameters are formulated, and the type change is directly called; The modular design of the changing tooling adopts pin positioning to reduce the disassembly time; Material box, press knife, etc. are equipped with adjustment fixtures to quickly adjust and position; The servo feeding and servo tablet pressing mechanism can directly call the system formula parameters and realize quick position adjustment.
| Project | Specifications |
| Thickness T | 5～30mm |
| Width W | 80～200mm |
| Length L | 120～300mm |
| Polar ear length L1 | 10～30mm |
| Polar ear direction | Same side/different side |
| Project | Specifications |
| Positioning method | CCD positioning |
| Stacking efficiency | Single workstation≤0.6s/pcs |
| Auxiliary time | ＜10s |
| The alignment accuracy between the pole and the diaphragm | Center deviation≤±0.3mm |
| Diaphragm end facing accuracy | ≤±0.3mm |
| Adjacent polar alignment accuracy | ≤±0.2mm |
| Polare overall alignment accuracy | ≤±0.3mm |
| Number of laminated layers | It can be set within the thickness adaptation range |
| Outsourcing diaphragm | No tail coil, the outer layer of the cell is a single-layer diaphragm |
| Pass rate | ≥99.5%(Bad Caused Only by This Machine) |
| Crop dynamics | ≥98%（Failure caused only by this machine） |
| Dimensions of appearance | W4000mm x L2400mm x H2600mm |
| Weight/Bearing | About 5000Kg；＞650Kg/M² |
| Power supply | AC380V Three-phase; Voltage fluctuation ±10%; Power: 15KW; Frequency: 50Hz |
| Compressed air | 0.5～0.7Mpa（5～7kgf/cm²），Dosage 800L/min |
RELATED PRODUCTS
Consult immediately
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
An intelligent modern intelligent manufacturing enterprise integrating research and development, production, sales and service
CONTACT
Address: Building 1, No. 161, Dalingshan shuichang Road, Dalingshan Town, Dongguan
Tel：+86-769-83356696-808
Fax：+86-769-83356696
Sales Hotline：+86-18025940599（Mr.Chen)
E-Mail：ChenJiedong@gd-zhonghe.com
Follow us
COPYRIGHT 2023Guangdong Zhonghe Intelligent Equipment Co., Ltd Disclaimers
