Thank you for following Zhonghe Intelligence
PRODUCT THROUGH TRAIN
Slitting machine
Electronic slitting knife holder, the vacuum under the knife holder is vacuumed by the fan knife module, convection on both sides, and the positive pressure on the other side is negative pressure to form convection to remove the vacuum. The wind knife slit is available in 0.2mm-0.5mm. System detection speed: 100m/min, labeling speed: 12 sheets/s, labeling accuracy: ±15mm. Rolling brush dust removal/iron removal, a pair of front and back polar permanent magnet iron removal rods on the left and right. The magnetic rod is a square permanent magnet with a magnetic flux of ≥ 12000GS; the magnetic rod is adjustable from the surface of the electrode 5-20mm. Rewinding diameter: max700mm, winding alignment: ±0.3mm, winding tension control accuracy: ±3N(FS).
key word:
Category:
Precision slitting machine
Hotline:
Slitting machine
Product specifications
| Items | Technical parameters |
| Slitting width accuracy | ±0.2mm |
| Slitting speed | 10-50m/min |
| whiskers | V＜8μm，H＜12μm |
| Pole piece serpentine | ±0.2mm/1000mm |
| wavy border | ±0.4mm |
| Winding accuracy | ±0.3mm |
| Equipment availability | ≥98% |
Product details
System detection speed: 100m/min; labeling speed: 12 sheets/s; labeling accuracy: ±15mm
A pair of positive and back poles permanent magnet iron rods on the left and right. The magnetic rod is a square permanent magnet with a magnetic flux of ≥ 12000GS; the magnetic rod is adjustable from the surface of the pole by 5-20mm.
Rewinding diameter: max700mm; Rewinding alignment: ±0.3mm; Rewinding tension control accuracy: ±3N(FS).
Core technology: electronic slitting knife holder
The tool vacuum under the tool holder is vacuumed by the wind knife module. Convection on both sides is positive and negative pressure on the other side forms convection to remove the vacuum. The wind knife slit is available in 0.2mm-0.5mm.
Introduction to key modules & parts
◆ Top blade fine-tuning mechanism
The upper blade fine-tuning mechanism is adjusted by YX axis precision slide table, and the fine-tuning parameters are displayed through an electronic micrometer.
◆ Upper blade alcohol wiper device
The upper blade wiping device regularly supplies alcohol to the knife wiping device through a servo alcohol pump to provide cleaning and cooling to the upper blade.
◆The vacuum installation of the tool holder is fully enclosed, that is, plugged and unplugged
Fully enclosed vacuuming has a better effect on dust control, small leakage and thorough dust removal.
◆Knife shaft cantilever compensation device
The knife shaft cantilever compensation device adopts S136, which is quenched. The transmission side is designed with a cantilever compensation device to ensure that when the partition is removed, in the cantilever state, the operating side knife seat is removed from the tool holder, and the cantilever does not sag.
RELATED PRODUCTS
Consult immediately
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
An intelligent modern intelligent manufacturing enterprise integrating research and development, production, sales and service
CONTACT
Address: Building 1, No. 161, Dalingshan shuichang Road, Dalingshan Town, Dongguan
Tel：+86-769-83356696-808
Fax：+86-769-83356696
Sales Hotline：+86-18025940599（Mr.Chen)
E-Mail：ChenJiedong@gd-zhonghe.com
Follow us
COPYRIGHT 2023Guangdong Zhonghe Intelligent Equipment Co., Ltd Disclaimers
